Altawel Water Solutions

The Danfoss Low Pressure Switch is a reliable and precise device designed to monitor and control low-pressure levels in various systems, such as HVAC and refrigeration units. It automatically activates or deactivates equipment based on pre-set pressure thresholds, ensuring optimal performance and safety. Compact and durable, this switch is ideal for maintaining consistent operational efficiency in both residential and commercial applications.

High Pressure Switches
Monitor the system inlet pressure and signals the controller to shut-down the RO booster pump and system
when the pressure is higher than the pre-set pressure.
High Pressure Switches Used in Commercial Plants.
For Industrial Use 
Suitable For RO Plants
Premium Quality
Available at best price.

 

LPS (Low Pressure Switches), are basically a simple electro- mechanical device functioning on the following basic principle: When a any change occurs in water pressure on low pressure side of an elastic diaphragm, it shifts transmitting a force to a pre calibrated snap switch. So when Diaphragm motion is opposed by a calibrated spring inbuilt in the micro switch that determines the range of the switch.The LP switch is located at the supply water side of Booster Pump and it will turn OFF the pump in case of water is stop coming from main supply or of the pressure is very low for functioning of the RO.

Low Pressure switches monitor the system
LPS inlet pressure and signals the controller to shut-down the RO booster pump and system when the pressure is lower than the pre-set pressure.

- Premium Quality
- Available at best price.
Good Quality
Ready Stock

 

RO high-pressure switch (hps) for all kinds of RO system suited for common ro water filter purifiers available in india, compatible with many ro brands and models-can be used in multiple water purifier models-counter top, desk top, stand mounted, wall hanging, under sink, most of the ro model cabinets. Save RO motor from overloading due to blockage of water in the RO unit. If the back pressure is high, this switch will act and turn off the power supply to booster pump thus saving the pump from overloading. Also ideal product for lab purpose/research/project design/demo work who would like to explore the functioning of the various filtration systems in our global environment by cross section analysis... Description: this hp switch is fitted on the output side of ro booster pump and will turn off the power supply to the pump when the water back pressure increases, as a result, a blockage in the reverse osmosis system. This will help to avoid overload of the booster pump and prevents burning of the coils inside the pump.